Procedure
1. Place a new O-ring on the front side of the exhaust filter.
2. Install the exhaust filter
– Be careful with the O-ring.
– An arrow on the filter indicates the installation orientation.
– The arrow must point upwards (
↑
).
3. Insert the filter spring in the housing.
4. Turn the screw until the filter spring is level.
5. Fit the separator cover plate with new flat seal.
6. Tighten the screws on the separator cover plate evenly.
– Tightening torque:
6 Nm
7. Assemble the exhaust line.
Maintenance
40/52
