Pfeiffer Vacuum A 1204H, Operating Instructions Manual

Page: 29 / 92

Installation
29
5.9.3 Default setting
When the pump is delivered, it runs according to the default setting: it depends on the
product ordering guide.
The user or the integrator is responsible for the application for which the pump is used
and must adapt the parameters accordingly
(see 8.2) .
5.9.4 Access code modification
The setting made at the factory is protected by an access code (“0” default setting) which
disables parameter modification. Access code and parameters can be customized
(see
8.2) .
5.9.5 Reset the clock
To ensure correct fault monitoring and customized parameters, it is necessary to initialize
time and date of the product
(see 5.9.6) .
5.9.6 Navigation in the menus
Fast scroll by continuously holding down the + and – keys. For the other keys, press sev-
eral times.
Example of resetting the clock:
Press the
SET
key to enter the menu.
Validate with the ENTER key.
Access to the selected menu with the + or – keys.
Validate with the ENTER key.
Access to the selected parameters with the + or – keys.
185H
PUMPING STOPPED
06/05/13 10:10 HHR
PASSWORD
*0*
DEFINITION
SETTING
MAINTENANCE
MANAGEMENT
DEFINITION
SETTING
MAINTENANCE
MANAGEMENT
CONTRAST
PURGE
WATER FLOW
POWER