Operating and Maintenance Instructions - Chiller - Series EB 210 - EB 440
© Pfannenberg GmbH
Page 41 / 50
EN
7. Operating
7.1. Carry out settings
If other settings are needed, e.g. lower or higher supply temperature or different operating mode, this can be done
by changing the corresponding parameters.
For detailed description of how to change parameters please check the enclosed
Controller manual.
7.2. Starting the chiller after an interruption
CAUTION
Undefined operating status
To avoid an undefined operating status, a functional restriction or a device fault, after switching
OFF
the chiller,
wait for about 30 seconds before turning it
ON
again.
7.3. Stop chiller and switch it OFF
Use the main switch to either stop the chiller or turn the chiller
OFF
.
