Preparation
26
4
5
3
6
7
1
2
Fig. 8 -02
Draw the thread from the reel stand through guide hole
●
1
into the bobbin winder tension
unit
2
and then behind the thread clamp
3.
Cut off the thread in thread clamp
●
3.
The thread is retained.
Place empty bobbin
●
4
on the bobbin winder spindle.
To switch on the bobbin winder, push up lever
●
6.
The bobbin is wound during sewing.
The bobbin winder stops automatically, when the bobbin
●
4
is fi lled suffi ciently.
Remove full bobbin
●
4
and cut off the thread in thread clamp
3.
The tension of the thread on bobbin
●
4
can be adjusted on the bobbin winder tension unit
2.
The volume of thread on bobbin
●
4
can be adjusted with screw
7.
8
.02
Winding the bobbin thread, regulating the winder tension
Summary of Contents for POWERline 2595 BASIC
Page 35: ...Note ...
