Maintenance and troubleshooting
63
Removing the needle plate
Raise the presser foot holder (26) and
remove the presser foot. The needle must
be at its highest position.
• Remove the detachable work support
(13). Loosen the two screws with the
screwdriver and lift the needle plate
(14).
• Clean the feed dog (22) with the brush.
Changing the sewing lamp.
Switch off the master switch (12).
• Remove the detachable work support
(13). The sewing lamp (bulb) is located
inside the needle head of the machine.
Turn the bulb half a rotation counter
clock-wise and remove the bulb. Insert
the bulb in the reverse order.
Important!
The maximum permissible
wattage of the bulb is 15 watts.