Pfaff cvreative 3.0, Owner'S Manual, Page: 76 / 112

A
B
C
Embr
oidery Mode - Pr
epar
ations
7:4
To hoop the fabric
For the best embroidery results, place a layer
of stabilizer beneath the fabric. When hooping
stabilizer and fabric make sure that they are smooth
and securely hooped.
2SHQWKHTXLFNUHOHDVH$RQWKHRXWHUKRRS
5HPRYHWKHLQQHUKRRS3ODFHWKHRXWHUKRRSRQ
DÀUPÁDWVXUIDFHZLWKWKHVFUHZRQWKHORZHU
ULJKW7KHUHLVDVPDOODUURZLQWKHFHQWHURIWKH
lower edge of the hoop which will line up with
a small arrow on the inner hoop.
3ODFHVWDELOL]HUDQGWKHIDEULFZLWKWKHULJKW
sides facing up, on top of the outer hoop. Place
the inner hoop on top of the fabric with the
VPDOODUURZDWWKHERWWRPHGJH,I\RXFDQVHH
the hoop size in the lower part of the inner
KRRS\RXKDYHDWWDFKHGLWFRUUHFWO\&
3XVKWKHLQQHUKRRSÀUPO\LQWRWKHRXWHUKRRS
&ORVHWKHTXLFNUHOHDVH$GMXVWWKHSUHVVXUHRI
the outer hoop by turning the retaining screw
%7KHIDEULFVKRXOGEHWDXWLQWKHKRRSIRUWKH
best results.
Note: When embroidering additional designs on the
same fabric, open the quick release, move the hoop to the
new position on the fabric and close the quick release.
When changing type of fabric, you might need to adjust
the pressure using the retaining screw. Do not force the
quick release.
Slide on/off the hoop
6OLGHWKHKRRSRQWRWKHHPEURLGHU\XQLWIURPIURQW
to back until it clicks into place.
7RUHPRYHWKHKRRSIURPWKHHPEURLGHU\DUP
press the grey button on the hoop connection
assembly and slide the hoop towards you.