Pfaff cvreative 3.0, Owner'S Manual, Page: 25 / 112

2:9
Pr
epar
ations
Changing the presser foot
Remove presser foot
Press the presser foot downwards until it
disengages from the presser foot holder.
Attach presser foot
/LQHXSWKHSLQVRQWKHIRRWZLWKWKHJDSXQGHUQHDWK
the presser foot holder. Press upwards until the foot
snaps into place.
<RXFDQDOVRXVHWKHSUHVVHUIRRWXSGRZQEXWWRQV
to raise or lower the presser foot holder. Place the
presser foot under the presser foot holder, so that
the pins of the foot snap onto the presser foot holder
when lowered.
Changing the needle
8VHWKHKROHLQWKHPXOWLSXUSRVHWRROWRKROG
the needle.
/RRVHQWKHQHHGOHVFUHZ
5HPRYHWKHQHHGOH
,QVHUWWKHQHZQHHGOHXVLQJWKHPXOWLSXUSRVH
WRRO3XVKWKHQHZQHHGOHXSZDUGVZLWKWKHÁDW
side away from you until it will go no further.
7LJKWHQWKHQHHGOHVFUHZDVWLJKWDVLWZLOOJR
Lowering feed dogs
<RXFDQORZHUWKHIHHGGRJVE\PRYLQJWKHVZLWFK
RQWKHIURQWRIWKHVHZLQJPDFKLQHWRWKHOHIW0RYH
the switch to the right if you wish to raise the feed
dogs.
When embroidering the feed dogs are lowered
automatically as the embroidery unit is connected.
:KHQWKHHPEURLGHU\XQLWLVUHPRYHGWKHIHHG
dogs are raised automatically when you start
sewing.