Pfaff cvreative 3.0, Owner'S Manual, Page: 37 / 112

3:7
Machine settings & buttons
Start/stop
Press this button to start or stop the machine
without using the foot control. Press the button
once to start and press it again to stop.
Thread snips
Press to cut both needle and bobbin thread
immediately.
,ISUHVVLQJWKLVEXWWRQZKLOHVHZLQJWKHPDFKLQH
will complete the stitch and cut the threads before
WKHQHHGOHPRYHVWRWKHVWDUWSRVLWLRQRIWKHQH[W
VWLWFK<RXUPDFKLQHWLHVRIIWKHWKUHDGFXWVWKH
needle and bobbin threads and raises the presser
foot and the needle.
7KHWKUHDGVQLSVIXQFWLRQFDQEHSURJUDPPHGVHH
SDJH
Note: Threads are cut automatically when buttonholes
are sewn with the Sensormatic buttonhole foot.
The presser foot will not raise after thread snips if
automatic presser foot lift has been deactivated in the
settings menu.
Thread snips performed by the machine can be cancelled
in the settings menu.
In embroidery mode the threads are cut and the presser
foot raised. The needle thread only cuts automatically at
WKHFRORUFKDQJH:KHQWKHGHVLJQLVÀQLVKHGERWKQHHGOH
and bobbin threads are cut automatically.
Reverse button
)RUSHUPDQHQWUHYHUVHSUHVVWKHEXWWRQRQFHEHIRUH
VWDUWLQJWRVHZ7KHUHYHUVHLQGLFDWRUZLOOEHOLW
DQGWKHPDFKLQHVHZVLQUHYHUVHXQWLO\RXSUHVV
WKHEXWWRQDJDLQWRFDQFHO,I\RXSUHVVWKHUHYHUVH
EXWWRQZKLOHVHZLQJWKHPDFKLQHVHZVLQUHYHUVH
IRUDVORQJDV\RXNHHSWKHEXWWRQSUHVVHG7KH
UHYHUVHLQGLFDWRULVOLWZKHQWKHUHYHUVHEXWWRQLV
pressed.
5HYHUVHLVDOVRXVHGZKHQVHZLQJPDQXDO
EXWWRQKROHVGDUQLQJVWLWFKHVSURJUDPPHGWLHRII
end and tapering stitches.
Reverse indicator
7KHUHYHUVHLQGLFDWRUZLOOEHOLWZKHQSUHVVLQJWKH
UHYHUVHEXWWRQWRVHZLQUHYHUVH,WLVDOVROLWZKLOH
VHZLQJSHUPDQHQWUHYHUVH
Action indicator
7KHDFWLRQLQGLFDWRULVOLWWRLQGLFDWHWKDWDQDFWLRQ
LVWREHGRQHIRUH[DPSOHSHUIRUPLQJWDSHULQJ7KH
indicator stays lit until the action is done.
Reverse button
Reverse indicator Action indicator
Start/stop
Presser foot up and extra lift toggle
Thread snips
Presser foot down and pivot toggle
Stitch restart
Immediate tie-off
Needle up/down
Speed control