Pfaff creative sensation, Owner'S Manual, Page: 98 / 164

7:4
A
B
E
D
C
1
E
2
D
3
Embr
oidery Mode - Pr
epar
ations
Remove the embroidery unit
1. To store the embroidery unit in the embroidery
case, move the embroidery arm to park position
by selecting park position on the screen in either
Embroidery edit or Embroidery stitch-out.
2. Press the button at the left, underneath the
embroidery unit (A) and slide the unit to the left
to remove it.
3. The cover of the socket closes automatically.
4. Store the embroidery unit in the original
packing material, place in the soft carrying bag.
Attaching the Dynamic spring foot
for embroidery
1. Disengage the IDT™ system (B). Remove the
standard presser foot (C). Carefully loosen the
screw (D) until the cross-hole (E) is accessible.
2. Squeeze the embroidery foot gently together
and guide the pin of the foot into the cross-hole
(E) of the presser foot holder as far as it will go.
The arm on the foot should be placed behind
the needle screw.
3. Tighten the screw (D).
To remove the embroidery foot loosen the screw
(D), squeeze the embroidery foot together and pull
it out to the right. Tighten the screw (D).