Pfaff creative sensation, Owner'S Manual, Page: 48 / 164

3:10
PF
AFF®
creativ
e™
Color T
ouch Scr
een
Stitch width safety
Select this function when using a straight stitch
presser foot to lock the needle in center position for
all stitches, preventing damage to the needle and/or
presser foot.
This function is automatically selected, and cannot
be deselected, when the straight stitch needle plate
is attached.
When turning on the machine with this setting
activated and for every stitch selection that is not
a straight stitch, a pop-up informs you that it is set
to straight stitch. Deselect stitch width safety to go
back to normal sewing.
Note: Twin needle and stitch width safety cannot be used
at the same time.
Cut jump stitches
Your machine features the automatic function
Cut jump stitches. This function saves you time
trimming after the embroidery is completed. When
Cut jump stitches is selected your machine will trim
the top jump stitch thread and pull the thread end
to the underside of the fabric as you embroider.
Note: Your machine will also cut the thread after you
have changed to a new color. Hold the thread end when
you start embroidering again, so that you can easily
remove the thread end when cut.
Designs marked with this symbol are
programmed for Cut jump stitches. Jump stitch
trim commands can be added to any design using
the
5D™
Organizer Software, included with your
machine.
Automatic thread snips
When selected, the automatic thread snips is
activated. The threads are cut automatically and
the presser foot raises at color changes or when
an embroidery is À nished. When deselected, no
automatic thread snips will be performed.
p