Pfaff creative 3.0, Owner'S Manual, Page: 96 / 112

9:10
Embr
oidery mode - stitch-out
Check needle thread
The machine stops automatically if the needle
thread runs out or breaks. Re-thread the needle
thread, close the pop-up, step back a few stitches
and start embroidering again.
Cut thread end
If cut jump stitches is not activated in machine
settings in the settings menu, the machine will stop
after stitching a few stitches. Cut the thread end and
press start/stop to continue embroidering.
Change to Cutwork Needle (
RSWLRQDODFFHVVRU\
Some cutwork designs can be stitched out using the
optional accessory PFAFF
®
Embroidery Cutwork
Needle Kit, (P/N 820 945-096). These designs
are marked with a cutwork needle symbol in the
creative
™ 3.0 Embroidery Collection. When the
machine stops and this pop-up message is shown,
insert the corresponding cutwork needle. Touch
OK and press the start/stop button to resume
embroidering.
Note: These cutwork designs can also be stitched without
the cutwork needles, but that color block will then have to
be cut manually. If cutting manually, go to the next color
block in the color block list when the pop-up appears.
Machine needs to rest
If the machine stops and this pop-up appears on
the screen, the machine needs to rest. When the OK
icon is enabled you can resume embroidering. The
embroidery results will not be affected.