Pfaff creative 3.0, Owner'S Manual, Page: 78 / 112

Color block list
A
Embr
oidery Mode - Pr
epar
ations
7:6
Note: This machine features the automatic function Cut
jump stitches. When activated the machine trims the
top jump stitch threads and pulls the thread ends to the
underside of the fabric. The default setting is on. To turn
it off, go to the Settings menu, Embroidery settings and
deselect Cut jump stitches. Read more about Cut jump
stitches in chapter 3.
8. If Cut jump stitches is not activated the machine
will stop after stitching a few stitches. A pop-
up appears on the screen asking you to cut the
thread end. Cut the thread and press start/stop
to continue embroidering.
9. While you embroider, you can touch color list
to see all colors in the design. The active color
block is marked with a green frame (A).
:KHQWKHÀUVWFRORULVFRPSOHWH\RXUPDFKLQH
stops. Re-thread with the recommended thread
color that is displayed in the pop-up and
continue embroidering by pressing start/stop.
Each color segment is tied off at the end and the
needle thread is cut.
11. When the embroidery is completed, your
machine cuts the needle and bobbin thread
and stops. The needle and presser foot raise
automatically for easy removal of the hoop.
A pop-up informs you that your embroidery is
ÀQLVKHG7RXFK2.WRNHHSWKHGHVLJQORDGHG
and stay in Embroidery stitch-out.