
Embro
idering
Getting Started Embroidering
1. Clear sufficient space to accommodate movement of
the embroidery arm and the hoop.
2. Make sure the machine is turned off and slide the
embroidery unit onto the free arm of the machine
until it plugs firmly into the socket. Turn on the
machine. It will automatically restart and enter
embroidery mode. A pop-up tells you to remove the
hoop for positioning. Press OK. The machine will
calibrate and the embroidery arm will move to the
ready position.
3. Make sure the IDT™ system is disengaged and
attach the embroidery foot. Insert a bobbin with
lightweight bobbin thread.
4. Select a design number from the machine by using
the keypad or select one from a USB embroidery
stick (make sure that the USB embroidery stick is
connected) and press OK to load to embroidery
stitch-out.
5. The design is placed in the center of the hoop.
6. Hoop a piece of fabric and stabilizer, and slide the
hoop onto the embroidery arm.
7. Thread the machine with the first color in the color
list.
8. Lower the presser foot. Hold the needle thread and
press the start/stop button or the foot control. The
machine starts embroidering and stops
automatically after few stitches. A pop-up appears
asking you to cut thread end. Cut thread end and
press OK. Continue embroidering by pressing start/
stop or the foot control.
Note: Automatic stop for cut is activated by default. Open the
settings menu to deactivate this setting. Automatic stop for
cut is disabled if you use the foot control when embroidering.
9. When the first color is completed, your machine
stops. A pop-up appears asking you to change color.
Re-thread with the next color and press OK.
Continue embroidering by pressing start/stop or the
foot control. Each color segment is tied off at the end
and the needle and bobbin threads are cut.
10. When the embroidery is completed, your machine
cuts both threads and stops. A pop-up informs you
that your embroidery is finished. Press OK. Raise the
presser foot to easily remove the hoop.
54
Summary of Contents for creative 1.5
Page 1: ...Owner s Manual...
Page 66: ......