Pfaff creative 1.5, Owner'S Manual, Page: 30 / 68

Pr
epar
ations
Settings Menu
In the settings menu, you can adjust the machine
settings, sound settings and screen settings. Open by
pressing the settings menu button and select the setting
you wish to adjust by pressing the up and down arrow
buttons on the wheel. Use the left and right arrow
buttons to adjust the values. Activate settings or open a
list of choices by pressing OK. A solid box means a
function is activated, an empty box means it is not
activated.
Note: If a setting cannot be combined with a previously
selected setting, the outlines of that box will be dashed.
Different settings are available depending on whether you are
in sewing or embroidery mode.
Press the settings menu button again to leave the
settings menu.
Thread Tension
Your sewing machine will electronically pre-set a thread
tension for the selected stitch. Depending on the fabric,
batting, thread etc, the tension may need to be adjusted.
Use the left and right arrow buttons on the wheel to
adjust the thread tension. The changes only affect the
selected stitch. The setting will go back to default when
you select another stitch.
In sewing mode, press the info button to see
the current selected thread tension.
Twin Needle
Activate the twin needle program and use the left and
right arrow buttons on the wheel to set the twin needle
width. When a twin needle size is selected, the width of
all stitches is limited for that needle size to prevent
needle breakage.
In sewing mode, press the info button. The
twin needle recommendation icon will be
shown. The setting is kept until you deactivate
it.
Note: Twin needle and stitch width safety cannot be used at
the same time.
Note: A warning pop-up will be shown if you select a stitch
that is too wide for the set twin needle size.
Stitch Width Safety
Select this function when using a presser foot for
quilting, available as an optional accessory, to lock the
center needle position for all stitches and prevent
damage to the needle or presser foot.
In sewing mode, press the info button. The
stitch width safety icon will be shown. The
setting is kept until you deactivate it.
30