13
Changing the needle
Turn off the electrical power
To remove:
Lower the presser foot and move
the needle(s) to the highest position by turning
the handwheel towards you. Push the needle
inserting tool (from the accessory box
47
) from
below upward fully over the needle. Loosen the
fastening screw of the needle (without remo-
ving it) with the Allen key (behind the swivel
plate) and pull the needle down to remove.
To insert:
Insert the needle into hole
E
of the
needle inserting tool, so that the
fl
at needle
shank
K
faces the
fl
at side
L
of the inserting
tool. Insert the needle fully into the holder
and tighten the fastening screws. Remove the
needle inserting tool.
Overlock needles types
EL X 705, cat. no. 2002
are required for this machine.
