10
Spool disc/cone thread adapter
It is advantageous to use the spool disc
37
when sewing with large spools (5,000 - 10,000
m). To do this, place the cone thread adapter
36
onto the spool pin
35
. With synthetic threads,
the spool discs help eliminate vibration of the
cones/spools aiding in smoother feeding of the
threads.
Clip on thread guide
Use the clip on thread guide accessory when
sewing with decorative thread. Clip this onto
the telescoping thread guide
32
and thread the
machine as shown in the illustration. Use the
thread net and/or the thread unreeling disc if
needed.
Presser foot lifter
The presser foot can be raised and lowered
using the presser foot lifter
43
. The maximum
vertical lift of 6.5 mm for the presser foot for
particularly thick fabrics can be achieved by
pressing the presser foot lifter towards the rear.
Once an initial thread chain has been created,
the presser foot lifter no longer needs to be
raised if you continue working with the same
thread and presser foot. It is suf
fi
cient to gently
lift the front part of the presser foot using your
thumb. Slide the fabric under the raised part
of the presser foot. The fabric is automatically
taken up and fed into the machine when you
activate the foot control.
