Adjustment
86
1
2
3
4
Fig. 13 - 07
●
Switch on the machine and set the sealing temperature at its minimum value.
●
Call up the input menu.
●
Position the heating element
●
Adjust screw
1
(clamp screw
2
) in accordance with
requirement 1
.
●
Adjust screw
3
(lock screw
4
) in accordance with
requirement 2
.
●
Switch off the machine.
13
.07.03
Hot wedge to feed roller clearance and contact pressure
Requirement
1. The hot wedge should be touching the workpiece.
2. The contact pressure of the hot wedge should be set so that a good seam quality
is guaranteed, and so that the hot wedge cannot move backwards when sealing cross
seams.
