Setting up
9 - 3
9
.02
Adjusting the penetration depth
The feed roller clearance depends on the thickness of the material to be sealed.
The clearance is adjusted correctly, when one ply of the workpiece fits just
between the feed rollers with the top feed roller lowered.
Switch off the machine!
Danger of crushing between
the housing and adjustment
ring
1.
!
Loosen the three screws
1
.
!
Adjust the feed roller clearance with
adjusting ring
2
.
!
Tighten screws
1
.
Fig. 9 - 04
1
2
9
.03
Setting the feed motion of the sealing tape
!
With regulator
1
adjust the feed motion
of the sealing tape so that a reliable
sealing seam start is guaranteed.
Fig. 9 - 05
1
From
the
library
of:
Diamond
Needle
Corp