7 - 5
Controls
7
.09
Regulator for hot-air pressure
●
The hot-air pressure is adjusted by
turning regulator
1
.
●
The hot-air pressure level can be read
from pressure gauge
2
.
The hot-air pressure must not
drop below 0.2 bar!
If the hot-air pressure is too
low, there is a risk of the
heating rod burning out. The
heating therefore switches off
automatically when the hot-air
pressure is too low.
Fig. 7 - 09
1
2
7
.10
Regulator for feed roller pressure
●
The feed roller pressure is adjusted by
turning regulator
1
.
●
The pressure level can be read from
pressure gauge
2
.
Fig. 7 - 10
1
2
From
the
library
of:
Diamond
Needle
Corp