manualshive.com logo in svg

Pfaff 3834-14/11, Instruction Manual, Page: 9 / 112

Share
Download
Pfaff 3834-14/11 Instruction Manual Download Page 9

Safety

1 - 4

1

.06

Danger

A working area of 

1 meter

 is to be kept free both in front of and behind the

machine while it is in operation so that it is always easily accessible.

Never reach into the sewing area while sewing!

Danger of injury by the needle!

Never leave objects on the table while adjusting the machine settings!

Objects can become trapped or be slung away!

Danger of injury!

Do not operate the machine without support

 1

!

Danger due to top-heavy sewing head!

Machine can tip over backwards when tilted!

Do not operate the machine without its take-up lever guard 

2

!

Danger of injury due to the motion of the take-up lever!

Do not operate the machine without belt guard 

3

!

Danger of injury by rotating drive belt!

Do not operate the machine without tilt lock 

4

!

Danger of crushing between sewing head and table!

3

2

Fig. 1 - 01

63-021

1

4

Summary of Contents for 3834-14/11

















































































































Reviews:

No comments