manualshive.com logo in svg

Pfaff 3834-14/11, Instruction Manual, Page: 63 / 112

Share
Download
Pfaff 3834-14/11 Instruction Manual Download Page 63

Input

11 - 15

11

.03

Seam program administration

In the program administration the seam programs deposited in the machine memory and the

SD-Card can be deleted and copied. The left side of the display shows the programs in

machine memory. The right side of the display shows the programs on the SD-Card.

Selected programs are red marked. With the MDAT-function the machine configuration can

be copied or deleted. The Format-function formats the SD-Card. Further actions are shown in

a dialog window.

After SD-Card insertion it takes up to 20s until the card is detected.

●

Switch on the machine.

●

Call up the input mode.

●

Call up program administration.

Read SD-Card and machine memory again.

Explanation of the functions

Input mode

Calls up the basic display for the input mode.

Sewing mode

Quit input mode and call up sewing mode.

Program selection

After the program administration has been selected, at least one seam program is always

marked. Using the arrow functions, the desired seam program can be selected. With the

*-function and the arrow functions a seam program block can be marked. By pressing the

*.function again, the block function is deactivated.

Copy

Selected seam programs are copied from/to SD-Card.

Delete

Selected seam programs are deleted.

 

Summary of Contents for 3834-14/11

















































































































Reviews:

No comments