Mounting and commissioning the machine
8 - 5
8
.02.04
Mounting the toothed belt / Basic position of the machine drive unit
●
Switch on the machine.
●
Call up the input mode.
●
Select the service menu.
●
Enter the code number, see
Chapter 9.12 Entering/altering the code number.
●
Turn the motor shaft by hand, until the value "
11
" is under "POS" on the display.
●
Turn the balance wheel in sewing direction until the needle point descending from above,
is level with the top edge of the needle plate.
●
Fit toothed belt
5
, making sure that both motor shaft
4
(Fig. 8 - 07)
and the machine are
not moved.
11
2.5
2.5
50
Summary of Contents for 3834-14/11
