manualshive.com logo in svg

Pfaff 3801-11/071, Instruction Manual, Page: 8 / 126

Share
Download
Pfaff 3801-11/071 Instruction Manual Download Page 8

Safety

1 - 2

1

.03

Safety symbols

Danger!

Points to be observed.

Danger of injury for operating and specialist personnel!

1

.04

Important points for the user

●

This Instruction Manual is a component part of the machine and must be available to the

operating personnel at all times.

●

The Instruction Manual must be read before operating the machine for the first time.

●

The operating and specialist personnel is to be instructed as to the safety equipment of

the machine and regarding safe work methods.

●

It is the duty of the user to only operate the machine in perfect running order.

●

It is the obligation of the user to ensure that none of the safety mechanisms are removed

or deactivated.

●

It is the obligation of the user to ensure that only authorized persons operate and work on

the machine.

Further information can be obtained at your PFAFF agent.

I

Caution

Do not operate without finger guard and safety devices.

Before threading, changing bobbin and needle, cleaning

etc. switch off main switch.

Summary of Contents for 3801-11/071































































































































Reviews:

No comments