Pfaff 3801-11/071, Instruction Manual, Page: 41 / 126

Sewing
10 - 3
10
.02
Sewing with fixed programs
Fixed programs are stored under the program numbers 1 and 2 .
The fixed programs are used for the quick and easy production of seams with different
amounts of fullness. When sewing with fixed programs, 2 or 3 seam sections are sewn after
each other. With the knee switch it is possible to move to the next section. The fixed
programs are designed as cyclic running programs, i.e. at the end of the last seam section,
the machine moves back to the first seam section. The fullness value can be set for each
seam section, the settings for the stitch placement position and for the needle and sewing
foot positions apply to all sections and can be changed at any time with the corresponding
function..
●
Switch on the machine and select program number "1" or "2", see Chapter 9.07 Selecting
the program number.
Explanation of the displays and functions
Program selection
This opens the menu for entering the program number, see Chapter 9.07 Selecting the
program number.
Seam section
Shows the number of seam sections in the sewing program.
Input mode
Exit the sewing mode and select the input mode.
Fullness
Alters the fullness value, see Chapter 9.08 Inputting fullness .
Seam start (placement stitch)
Opens the menu for entering the placement stitch value.
Seam end (only on machines with tape feed device - 3801-11/071)
Opens the menu for entering the seam parameters at the end of the seam (pedal position "-
2"), see Chapter 9.10 Entering the seam parameters.