Pfaff 3568-12/12, Instruction Manual, Page: 12 / 52

12
4 Machine installation
Note: In case of damage due to transportation inform the transportation company and the
respective PFAFF agency.
.1 Lift machine off the transportation pallet by means of a fork lifter.
.2 Turn the six rubber buffer elements delivered with the accessories (fig. 1) into feet 2.
.3 Lower machine down on the floor and adjust it horizontally by shifting feet 2.
.4 Connect stacker stand 3 (fig. 2) on the front side of the machine.
Check hook lubrication by all means (see section 8.2) on machines that are put into operation
for the first time or that have not been used for a longer period (approx. 2 to 3 months).
5 Connecting for compressed air and electricity
5.1 Compressed air
Connect compressed air tube (inner diameter 6 mm) to coupling 4 (fig. 3).
Minimum network pressure: 7 bar
Working pressure: 6 bar
Pressure regulation: Valve 5
5.2 Electricity
.1 Permissible operating voltage is indicated in box 6 (fig. 4).
.2 Connection is permissible only if mains and operating voltage are the same.
.3 Machine must only be connected to an earthed plug.