Controls
18
7
.05.03
Function keys
The functions keys described below are used essentially to switch machine functions on and
off. When the function is switched on, the
diode in the key is illuminated
.
If a corresponding value has to be fi xed for the activated function, this can be carried out
with the corresponding
+/- keys
3.
By pressing and holding the corresponding
+/- key
, fi rstly the numerical value displayed abo-
ve it is altered slowly. If the
+/- key
is pressed longer, the numerical value changes more
quickly. The respective
+/- keys
shown opposite are described below.
Start backtacks
If this key is pressed, the backtack function at the beginning of the seam (start backtacks)
is switched on or off. In manual sewing the number of forward stitches (A) or reverse stit-
ches (B) for the start backtacks can be changed respectively by pressing the +/- key un-
derneath. To convert from double backtack to single backtack, reset the number of stit-
ches for the corresponding seam section.
End backtacks
If this key is pressed, the backtack function at the end of the seam (end backtacks) is
switched on or off. In manual sewing the number of reverse stitches (C) or forward stit-
ches (D) can be changed respectively by pressing the
+/- key
underneath. To convert from
double backtack to single backtack, reset the number of stitches for the corresponding
seam section.
Edge trimmer
Press this key to switch the edge trimming knife on or off.
Jig drive
Press this key to switch the jig drive unit on or off.
Foot position after trimming
If this key is pressed the "foot raised after thread trimming" function is switched on or off.
When the function is switched on, the presser foot is raised after thread trimming.
Thread trimmer
If this key is pressed the thread trimming function is switched on or off.
Alternate sewing
If this key is pressed, it is possible to switch between the linked programs.
●
●
●
●
●
●
●