
Controls
17
7
.05
Control panel
The control panel is used to call up machine functions for setting up the machine and for
sewing operation, for entering parameter values and for reading error messages and service
settings.
The control panel consists of display screen
1
with the function keys described below. The
display
1
consists of a two-row alphanumerical LCD display with
16
symbols per row. The
function keys
2
are located below and to the right of the display screen. The status of the
function keys and the machine operating modes are shown with LEDs in the corresponding
keys. Every time the function keys
2
are operated, a key tone sounds as confi rmation of the
input. If the input required is invalid, e.g. because the max. permissible value for the
parameter input has been reached, a double tone is audible. An SD-card reader for data
transfer is integrated.
7
.05.01
Screen displays
In the sewing mode all relevant sewing data is displayed and can be changed directly, de-
pending on the status of the machine, see also Chapter
10 Sewing
.
During the parameter input the selected parameter number with the corresponding value
is displayed, see Chapter "
12.12 Parameter settings
".
●
●
Fig. 7 - 06
1
2
3
7
.05.02
Symbole im Display
Program
Machine
memory
SD-memory
card
Enter
Program with corners