Pfaff 1591 Instruction Manual Download Page 64

Page: 64 / 82

Input

Dialogue box

The dialogue box is used to communicate the current operation. If necessary, additional

keys are shown for answering questions.

Enter key

Approval for a program.

All key

Approval for one or all marked programs.

Esc key

Reject for one or all marked programs.

Next key

Reject a program.

Select machine data

After pressing MDAT, the machine data can be copied or deleted on the SD card.

Format the SD card

The SD card is formatted after pressing FORMAT. A prompt for confi rmation is displayed be-

fore the SD card is formatted.

The card is completely formatted if it cannot be read. All programs and machine data in this

directory are deleted if they can be read and the directory \P

1591

for the

1591

exists.

If the directory \P

1591

for the

1591

does not exist, only the directory is created. This is to

ensure that programs from other machines and other fi les are not lost.

Summary of Contents for 1591



















































































Search results

Summary of Contents for 1591

Reviews:

Related manuals for 1591

Brands by name

Popular brands

Pfaff 1591, Instruction Manual

Search results

Summary of Contents for 1591

Reviews:

Related manuals for 1591

Brands by name

Popular brands