Pfaff 1591, Instruction Manual

Page: 31 / 82

Set-up
31
9 Set-up
Observe and comply with all regulations and information in this instruction
manual.
Pay particular attention to all safety regulations!
All set-up work may only be carried out by appropriately instructed personnel.
Disconnect the machine from the electricity mains for all set-up work by operat-
ing the main switch or by removing the mains plug!
9
.01
Inserting the needle
Fig. 9 - 01
2
1
Switch off the machine!
Risk of injury due to accidental machine start-up!
Only use needles of the system intended for the machine, see chapter 3 Tech-
nical Data !

Raise and fold out the roller presser 3 .

Move the needle bar to the top position.

Loosen the screw 1 and insert the needle 2 until you feel it stop. The long groove must
point to the left .

Tighten the screw 1 .
3