Adjustment
11 - 15
The adjustment is only necessary if the wick has been replaced.
When replacing the wick, make sure that the new wick is impregnated with oil.
●
Move the centrifugal disk
1
(screw
2
) according to
requirement 1.
●
Check
requirement 2
. If necessary, move centrifugal disk
1.
11
.05.13
Hook lubrication (only for PFAFF 1181 and 1183)
Requirement
1. The centrifugal disk
1
must be positioned
1.5 mm
in front of the oil ring
3
.
2. When the machine is running at full speed,
after approx. 10 seconds
a mark should be
made by a fine stripe of oil on the strip of paper placed over the needle plate cutout.
Fig. 11 - 14
2
1
3
1.5 mm
