English
Wire rope winch >LAMBDA< BGV C1 for stages and studios
04.04.014
technische Änderungen vorbehalten
design changes under reserve
changements techniques sous réserve
Seite / page 8
The Winch
Do not exceed the capacity of name plate.
Before taking into operation, a competent person must check:
Ö
the lifting device
Ö
the load bearing parts of the structure
Ö
the carrying medium
Ö
mounting
Daily examinations:
Ö
brake functions
Ö
condition of the rope and
loading device
Ö
load bearing parts of the structure.
Ö
the load carrying medium
Load attachment device:
Ö
check it has sufficient carrying capacity
Ö
load hooks must have safety catches
Ö
load hooks must be secured to the rope with a solid eye and high
pressure rope clamp and tested acc. to the regulations
Ö
fix the load correctly
Ö
do not use the winch rope as a hitching device
The winch should be given a thorough examination by a competent person at least once a year.
The entire installation has to be examined by a competent person before taking into operation, when
necessary, after considerable changes and every 4 years.
Always ensure the maintenance intervals are adhered to.
Only use original accessories and spare parts; otherwise safe function is not guaranteed.
Technical Data
Type
030272015 030272017 030272018 030272019
FEM Group acc. to DIN15020
2 m
2 m
2 m
2 m
Capacity
daN
300 300 300 300
rec. wire rope
DIN EN 12385-4, 15x7K-WSC-1960-B-sZ
rope ø
[mm]
ø6 ø6 ø6 ø6
minimum braking force
[kN]
33,1
max. rope reception 1 rope
m 1x10 1x14,8 1x19,8 1x24,3
max. rope reception 2 ropes
-
2x6,1
2x8,75
2x10,9
rope reception for shunting winch
7,5 13,0 18,0 23,0
max.
number
of
layers
1 1 1 1
required
crank
force
daN
18 18 18 18
crank force – without load
daN
ca. 4
ca. 4
ca. 4
ca. 4
lift per full turn of crank
mm
50
50
50
50
ratio
8,83:1 8,83:1 8,83:1 8,83:1
Brake / securing the load
Double safety spring brake with 2 built-in, independent of
each other operating, brake spring system
weight
kg
~ 30
~ 36
~ 42
~ 47
suitable for ambient temperature
- 20°C
÷
+ 40°C
Functional Description
The wire rope winch for stages and studios is a drum type winch. A single reduction pair of straight cut internal
spur gear drives the winch.
A double safety spring locking device automatically holds the load.
For better rope coiling, the winch is equipped with a spring loaded wire rope pressure drum.
The gear is designed for double nominal load according to BGV C1!
Mounting Instructions
Mounting:
ATTENTION:
Ö
the mounting structure must be designed to sustain the max. forces imposed by the winch, (pay attentions to
regulations for stages and studios)
Ö
pay careful attention that the mounting surface is flat and true
Ö
only fix the winch by means of good quality screws,
Ö
tighten the screws evenly
Ö
secure the screws
Ö
ensure that the crank is free running (crank clearance)
