8
Service Life of the Battery Pack
If any condition described below is observed, the battery pack is at the end of its service life. Replace it with a new
one.
• Although the battery pack has been properly charged (fully charged), a great drop in tying time has been noticed.
Do not charge the battery pack when this happens. If the motor’s rotational speed slows down, the power of the
battery pack is considered to be nearly depleted. Using the tool more will cause it to over discharge, resulting in a
shortened service life of the battery pack and also in functional trouble of the tool’s main body
Do not use a battery pack when its service life is finished. This will cause functional trouble in the tool’s main body.
Also charging a battery pack that is out of service life will lead to functional trouble in the battery charger.
Recycling the Battery
The battery pack may be illegal to dispose of this battery into the municipal waste system. Check with your local solid
waste officials for details in your area for recycling options or proper disposal.
5. OPERATING INSTRUCTIONS
How to set the Tie-Wire
• Be sure to set the Main switch to off, to lock the Trigger, and detach the Battery
pack.
Press the release lever and confirm that the release lever is caught in the release
stopper.
Peel off the tape fixing Tie-Wire by about 2" (5cm). Stretch out the tip of the wound Tie-Wire.
•
BE SURE TO USE ONLY PEX GUN TIE-WIRE.
The use of binding wire that has not been specified may cause breakdown of this equipment. Therefore, be sure
only to use the specified PEX GUN tie wire. Do not use binding wire that has become rusted, since the use of
rusted wire will cause equipment breakdown.
Push the reel stopper to release the reel holder.
Set the Tie-Wire in the tool by matching the side of the Tie-Wire. Then slide the reel stopper so that the reel
Holder can be pushed in the reel. Then push the reel holder and fix it by sliding the reel stopper.
Insert the tip
of the stretched out Tie-Wire into the wire guide.
• Put approximately 4" of wire into the Wire Guide.
