pewag forstgrip, Mounting Instruction

Page: 18 / 52

EN
Extending
Not all tyre manufacturers conform to ETRTO (European
Tyre and Rim Technical Organisation). Therefore it may
be necessary to use the enclosed extension parts on new
tyres and some tyre models.
Fit the extension parts in to the chain using the connecting
locks. Drive the securing pin fully in to the connecting lock
using a hammer.
Repair
If required, cut out any broken rings.
Fit a repair ring in it’s place in the tread net. Push the
connecting part over the repair ring.
Drive the securing pin fully in to the connecting part using
a hammer.
Attention
Any unauthorised modification of the chain will invalidate the
warranty and no claim can be made by the buyer. Should any
modifications be carried out, care must be taken to ensure that
there is sufficient space between the chain and the vehicle,
especially between the inside of the chain and any suspension
parts! Insufficient clearance could result in serious damage to
the machinery.
2
1
1
2
3