5
pewag bluetrack mounting instruction
pewag bluetrack
Mounting instructions pewag bluetrack
1
2
Roll out the pewag bluetrack segments and connect segment
1 marked "Seg. 1/2" to segment 2 ("Seg. 2/2") using the pewag
bluetrack lock (see Figs. 9-11 excl. tensioning).
Pull the pewag bluetrack over the wheels using a tension belt.
Now pull the pewag bluetrack further until both ends are located
at the same position.
3
4
Connect the two ends with the pewag bluetrack mounting
clamps by hanging in the clamps from the outside.
Move the machinery until both ends together with the pewag
bluetrack mounting clamps are in the middle of the two wheels
on the top.
5
6
Secure the pewag bluetrack assembly tool in the middle of
the two bars of the pewag bluetrack that are connected with
clamps. Make sure to use the pewag bluetrack assembly tool
provided for the tracks.
Note: Any similar, customary assembly tool may also be used
for assembly.
The pewag bluetrack assembly tool for the pewag bluetrack
perfekt must be secured to the profile with the setscrews
(SW 30 mm) to prevent the tracks from slipping down and / or
getting jammed.
Tools and equipment required:
Side cutter (to open the packaging), tension belt, pewag bluetrack mounting clamps, pewag bluetrack assembly tool,
wrench (wrench width SW 22 and 30 mm), 3/4" ratchet
EN
