20/21
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
FR
GB
DE
IT
ES
NL
GR
SE
PT
FI
DK
FUSE ALLOCATION
The fuses are accessed by removing the saddle storage
compartment.
BATTERY
Make sure you check that the battery is
disconnected before performing any
operations on it.
Batteries contain harmful products. In
case of leakage, you are advised to
consult a registered dealer who is
equipped to replace and dispose of
batteries without endangering nature and
the environment.
Battery power leads must never be
disconnected while the engine is running.
To avoid damage to the electronic circuit,
do not charge the battery if it is connected
to the vehicle.
Extended periods of immobilisation and storage
If the vehicle is not used for an extended
period, the battery will slowly discharge
naturally or due to its electronics or
certain accessories and must thus be
regularly charged.
If the vehicle is not used for a period of 1 month or
longer, the battery charge must be preserved:
- Using a maintenance charger (if the vehicle is not used
for a long period).
- If not, by disconnecting it from the vehicle (if the
vehicle is not used for a period of less than 2 months).
If these recommendations are not followed,
the battery may go into deep discharge. In
this case the manufacturer's warranty will
be void.
Removal of the battery
Remove the battery cover.
Disconnect the battery in the following order:
1.
The negative terminal.
2.
The positive terminal.
TWEET 50cc
F1
15A
Main fuse
F2
5A
Ignition coil
F3
2A
ECU-controlled carburetion system
F4
10A
+ after the ignition
TWEET 125 SBC
F1
20A
Main fuse
F2
15A
Injection system
F3
10A
+ after the ignition
F4
10A
Lighting
TWEET 125/151 ABS
F1
30A
Main fuse
F2
30A
Injection system
ABS System
F3
15A
+ after the ignition
F4
10A
Lighting
1
2
NOT_804135_TWT_EURO4-04A.mif Page 20 Vendredi, 16. juin 2017 1:11 13
Summary of Contents for TWEET 125 ABS
Page 1: ......
