Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
17/21
FR
GB
DE
IT
ES
NL
GR
SE
PT
FI
DK
DRAINING THE RELAY BOX
We advise you to go to a registered dealer
for draining.
Oil contains substances which are
harmful to the environment. Your dealer is
equipped to dispose of used oil without
endangering the environment and in
compliance with current standards.
The gearbox must be drained when the engine is warm so that
the oil will run easier.
• Place the vehicle on its central stand on flat ground.
• Place a container under the drain port.
• Remove the relay box filler cap (1).
• Remove the drain plug (2).
• Re-install the plug with a new seal.
• Pour the required quantity of oil corresponding to the
manufacturer's standards into the filler hole.
• Fit the filler cap.
REPLACING THE AIR FILTER
• Remove the air filter cover.
• Remove the air filter.
• Clean inside the air filter box.
• Fit a new air filter.
• Re-fit the cover.
• Remove the oil vapour return drain plug to let humidity and
oil drip out (3).
SETTING THE IDLE SPEED
1
• The engine must be at its operating temperature.
• Switch off the engine.
• Place the vehicle on its central stand on flat ground
• Remove the rubber plug.
• Check the operating clearance in the throttle
• Start the engine.
• Screw or unscrew the engine speed adjuster screw (4)
to alter the idle speed.
The rear wheel should not turn.
Relay box
SAE 80W90 API GL4
Quantity
0.17 I at oil change
2
1
3
1.
Version: Spark ignition engine with carburet-
tor
Idle speed
50 cc
2000 to 2200 rpm
125 cc
1700 to 1900 rpm
LO
CK
UN
LO
CK
4
NOT_804135_TWT_EURO4-04A.mif Page 17 Vendredi, 16. juin 2017 1:11 13
Summary of Contents for TWEET 125 ABS
Page 1: ......
