116
5
CHANGING LAMPS
Changing the combination of lights at
the back
-Remove the decorative frame of the rear
light sockets from the rear trunk.
-Unscrew the holding nut of the frame for
rear side light and change the combination
of light.
Changing the bulbs for rear lights
- Unscrew the holding nut of the rear light
from the rear trunk and take out the rear light
frame, then change the side light bulbs.
Change of lamp
Rear side lights
1-Side light lamp=
21 watts
.
2-Reverse gear light lamp=
21 watts
.
3-Light reflector-Small light lamp=
5 watts.
4-Rear anti fog light lamp=
21watts.
5-The brake light lamp=
21watts.
6-Small light lamp=
5watts.
All rear light lamps are changed trough
the rear trunk. To dismantle the frame
of the lamp, first unscrew the nut of the
frame and then change the fused bulb.
7-Vehicle number light lamp =
5 watts.
Unscrew the plastic cap of the lamp and
change the fused bulb.
WARNING
The bulbs are vacuumed and may break
during changing and cause injuries.
It is recommended that always keep
one set of required lamps, bulbs
and fuses with you in the vehicle.
Front/Rear Ceiling Lights
Enter a screwdriver into the slot, at the end
of the lamp, and lever off the lamp, detach
the lamp assembly from the console.
Keep the lights assembly, and open the
lamp base. Remove and replace the bulb
ensure that solid foundation is in place.
Then install lamp assembly in place.
Summary of Contents for PARS
