PEUGEOT PARS, Owner'S Manual

Page: 113 / 151

112
5
CHANGING WHEELS
Changing the wheels
Stop the car on a hard and smooth
surface, put the hand brake and shift the
Gear lever to Gear one or reverse Gear
and then intend to change the wheel.
Changing the reserve wheel
1- First, bring up the carpet covering
the reserve wheel in the rear trunk and
according to the sketch, hang it to the edge
of the rear trunk. Then open the belt.
2- Removing the reserve whee:
-Removing wheel spanner, jack and
hubcap spanner from the foam cover of
the reserve wheel.
-Removing reserve wheel from rear trunk.
3-Removing the wheel.
Removing the wheel
- Put the peak of the wheel spanner into
the groove of the hubcap, against the tire
air manifold and remove the hubcap.
- loosen the nuts of the wheel.
- locate the head of the jack in special
position for use of jack, in the required
side and raise the jack up. Then unscrew
the nuts of the wheel completely and take
out the wheel.
WARNINGS
-Park your car on a smooth and hard
surface which is not slippery (for
example, do not park on ceramics) and
if necessary use a barrier underneath
the base of the jack and switch on the
flashers (Emergency lights)
Put the hand brake and remove the
gear from neutral. Disembark the
passengers and lead them to a place
away from traffics.
-
Never
work under the vehicle when
the only resting point is jack. It is only
for the purpose of changing wheels.
- Always in order to change the
wheels, choose a safe place away
from traffics.
Disembark the passengers and lead
them to a place away from the vehicle.