PEUGEOT K1AAMA, User Manual, Page: 24 / 28

20/20 Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
FR
GB
DE
IT
ES
NL
GR
SE
PT
FI
DK
FUSES
Main fuse 15A.
Electrical equipment: 10A
Accessories fuse: 10A
Find the faulty fuse by looking at the condition of its
filament
Before changing a fuse, you must find the reason for the
fault and correct it.
Always replace the faulty fuse with a fuse of the same
rating.
BULB REPLACEMENT
Headlight bulb/Indicator bulbs
• Remove the front fairing (1).
Rear light and indicator bulbs
• Remove the 2 screws that secure the taillight lens (2).
HEADLIGHT ADJUSTMENT
The headlight is adjusted using a screw which can be
accessed from the rear shield panel (A).
If a fuse often blows this is usually a sign
of a short circuit in the electrical circuit.
You are advised to have the system
checked by a registered dealer.
You are advised to switch off the ignition
before changing a fuse and always to
replace it with a fuse of the same rating. If
you do not do so, this may lead to damage
in the electrical circuit or even a fire.
You are advised to contact a registered
dealer to have this operation carried out.
Under certain climatic conditions (low
temperatures, humidity). The presence of
mist on the inside of the headlight glass
is normal. It disappears a few minutes
after the lights are switched on.
Headlight bulb 12V - 35/35W (HS1)
1
Rear light bulb 12V - 21/5W
Indicator bulbs 12V - 10W
2
A