PEUGEOT K1AAMA, User Manual, Page: 20 / 28

16/20 Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
FR
GB
DE
IT
ES
NL
GR
SE
PT
FI
DK
CHECKING THE ENGINE OIL LEVEL
- Place the vehicle on its central stand on flat ground.
- Start the engine, let it run for a few minutes and then
stop it.
- Wait a few minutes for the oil to stabilise.
- Remove the cap/oil gauge (1).
- Wipe the cap/gauge and reinsert it into the filling orifice
without screwing it up.
- Remove the filler cap/gauge and check the oil level.
- The oil level shall not be between the minimum (A) and
maximum (B) level marks without exceeding the latter.
- Add oil if necessary.
CHANGING THE ENGINE OIL
The engine must be drained when it is warm to allow the
oil to run easier.
- Place the vehicle on its central stand on flat ground.
- Put on protective gloves.
- Remove the drainage cap and its seal (2) and allow
the oil to drip into a recipient.
- Remove the strainer cap (3) and clean the strainer (4).
- Check and clean the strainer.
- Put back the drainage cap and strainer cap, fitted with
a new seal.
- Pour the required quantity of oil corresponding to the
manufacturer's standards into the filler hole.
- Start the engine and let it run for a short while.
- Add oil if necessary.
- Check that the oil drain plug is sealed.
The engine oil level should always be
checked before you leave.
B
A
1
We advise you to go to a registered
dealer for draining.
Oil contains substances which are
harmful to the environment. Your dealer
is equipped to dispose of used oil without
endangering the environment and in
compliance with current standards.
XXXXXX-X
* XXXXXXXX
*
2
Engine oil
SAE 5W40 Synthetic API SL/SJ
Quantity
0.8 L.
4
3