PEUGEOT K1AAMA, User Manual, Page: 19 / 28

Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles 15/20
FR
GB
DE
IT
ES
NL
GR
SE
PT
FI
DK
MAINTENANCE ADVICE
Ensure that the servicing schedule for your vehicle is
strictly followed to maintain your contractual warranty
rights.
A table of inspections for the maintenance schedule is
inserted into the maintenance booklet. The registered
dealer must add his stamp, the date of servicing and the
number of kilometres the vehicle has covered.
In order to maintain maximum safety and reliability of
your vehicle, you are advised to have maintenance
and repairs carried out by a registered dealer who
has the necessary technical training, specific tools
and spare parts.
ENVIRONMENT / RECYCLABLE
Worn parts replaced during routine maintenance
(mechanical parts, battery, etc.) must be disposed of
with specialised bodies.
At the end of its life, the vehicle must be taken to an
authorised centre for recycling.
In all cases, comply with the local laws.
CLEANING THE VEHICLE
Wash the bodywork with soapy water and rinse with
generous amounts of clear water.
The vehicle can be dried with a chamois leather. After
washing the vehicle, brake several times at low speed to
dry out the brakes.
Certain silicon-based products can alter the quality of the
paintwork. In case of need or doubt, a registered dealer
can advise you on using cleaning products or restoring
scratched bodywork.
SPARK PLUG INSPECTION OR REPLACEMENT
The engine must be cold.
• Remove the spark plug access hatch.
• Remove the saddle storage compartment.
• Disconnect the suppressor.
• Remove the spark plug.
• Measure the distance between the electrodes and
correct it if necessary (A).
• Fit and screw in the spark plug manually.
• Tighten the spârk plug with a spanner.
• 1/8 - 1/4 turn for a reused spark plug.
• 1/2 turn for a new spark plug.
SERVICE OPERATIONS
Batteries contain harmful substances.
They must be disposed of according to
the legal requirements and must under
no circumstances be thrown away in the
household waste.
The bodywork is made of plastic parts
that can be painted or are shiny. Do not
use solvents or cleaning products that
are too corrosive.
Do not use high pressure cleaners
which may cause water to infiltrate the
following parts: seals, bearings and
hinges, electrical components such as
connectors, contactors and lighting.
The vehicle should be washed in a place
equipped for wastewater collection
It is essential to use a resistive spark
suppressor and a resistive spark plug in
accordance with the manufacturer's
recommendations.
Spark plug Electrode gap
NGK CR7HSA 0.6 to 0.7 mm
Ensure the suppressor is correctly
clipped onto the spark plug.
Have the torque quickly checked by a
registered dealer.
A A