54
6
7
6. ASSEMBLING THE REAR EXTENSION
This mitre saw has a rear extension
(A) Fig. 6
, which makes
the saw more stable if the head is accidentally released by
preventing it from tilting backwards.
7. ASSEMBLING THE DUST BAG
Insert the dust bag
(A) Fig.7
into the connection port
(B)
and
check that it is properly secured.
If you wish to improve dust removal, a vacuum cleaner with
a dust removal pipe may be connected directly to the extrac
-
tion elbow of the saw.
NB:
Empty the bag regularly in order to avoid a build up of
dust. The dust bag has a zip fastener to make it easier to
empty. The dust bag may also be rinsed with warm soapy
water and dried before reuse.
Make sure that the bag’s zip fastener is closed before you
use the saw.
8. GUIDE FENCE EXTENSIONS
The guide fence may be extended on the sides while cutting
wide workpieces. To do so:
1.
Loosen the Allen key screw
(B) Fig.8
using the Allen key.
2.
Loosen the locking knob
(C)
.
3.
Slide the extension
(A)
to the required position and tigh
-
ten the screw
(B)
and the knob
(C)
once more.
8
ASSEMBLY AND ADJUSTMENTS
IMPORTANT :
Before adjusting the saw, make sure it is disconnected from the power source.
For safe, accurate and effective saw operation, the following adjustment procedures must be complied with.
When all the adjustments have been made, make sure that all the keys and tools are outside the machine and that all the
screws, bolts and other fasteners are correctly fastened.
Do not use the saw before following these procedures.
While you make these adjustments, check that all the external parts are operating correctly and are in good condition.
Any damaged or broken parts must be replaced by a qualified person before the saw is used.
IMPORTANT ! Dust particles can give rise to
respiratory problems. For your own protection, the
use of dust masks that comply with applicable standards is
recommended.