PEUGEOT 407 2010, Manual

Page: 73 / 249

4
ACCESS
66
Reactivation of the interior
volumetric monitoring

Press the unlocking button on the
remote control to deactivate the
exterior perimeter monitoring.

Press the locking button on the
remote control to activate all the
monitoring functions.
The indicator lamp on the button again
fl ashes once per second.
Triggering of the alarm
This is indicated by sounding of the
siren and fl ashing of the direction indi-
cators for thirty seconds.
The monitoring functions remain ac-
tive until the alarm has been triggered
eleven times in succession.
When the vehicle is unlocked using
the remote control, rapid fl ashing of
the indicator lamp on the button in-
forms you that the alarm was triggered
during your absence. When the igni-
tion is switched on, this fl ashing stops
immediately.
Failure of the remote control
To deactivate the monitoring functions:

Unlock the vehicle using the key in
the driver's door lock.

Open the door; the alarm is trig-
gered.

Switch on the ignition; the alarm
stops. The indicator lamp on the
button switches off.
Locking the vehicle without
activating the alarm

Lock or deadlock the vehicle using
the key in the driver's door lock.
Malfunction
When the ignition is switched on, fi xed
lighting of the indicator lamp on the
button indicates a malfunction of the
system.
Have it checked by a PEUGEOT dealer.
* According to country.
Automatic activation *
2 minutes after the last door or the
boot is closed, the system is activated
automatically.

To avoid triggering the alarm on
entering the vehicle, fi rst press the
unlocking button on the remote
control.