PEUGEOT 407 2008, Owner'S Manual

Page: 28 / 204

1
INSTRUMENTS and CONTROLS
30
SERVICE INDICATOR
This is a visual reminder of when the
next service is due. This service is to
be carried out according to the manu-
facturer’s servicing schedule.
Service indicator zero re-set
Your PEUGEOT dealer carries out this
operation after each service.
However, if you carry out the service
yourself, the re-set procedure is as fol-
lows:

Switch off the ignition,

Press and hold the trip recorder re-
set button,

Switch on the ignition.
The display begins a countdown.
When the display shows
"=0" , release
the button; the spanner disappears.
Once an engine oil level indication has
been displayed, the display indicates
the total and trip distances.
If the service is overdue , each time the
ignition is switched on and for 5 seconds,
the distance and the spanner fl ash.
Example :
when the ignition is switched
on and for 5 seconds, the display in-
dicates that the service is overdue by
300 miles/km. The service should be
carried out very shortly.
Once the servicing and oil level informa-
tion has been displayed, the total distance
recorder resumes normal operation and
the spanner remains lit.
The point at which a service is due is
calculated using two parameters:
- the total distance travelled,
- the time elapsed since the last
service.
The distance remaining may be
weighted by the time factor, depend-
ing on the user’s driving habits.
Operation
As soon as the ignition is switched on
and for 5 seconds, the spanner sym-
bolising the service operations is lit.
The trip recorder display shows the
distance remaining (in round fi gures)
before the next service.
Example :
when switching on the igni-
tion and for 5 seconds, the display shows
that 900 miles/km remain before the next
service is due.
After this operation, if you
wish to disconnect the battery,
lock the vehicle and wait for at
least fi ve minutes, otherwise
the zero re-set will not be registered.