PEUGEOT 407 2008, Owner'S Manual

Page: 31 / 204

1
INSTRUMENTS and CONTROLS
32
TRIP COMPUTER
or
TRIP: access to the trip
computer displays.
Each successive press on the button
located at the end of the wipers stalk
displays different information.
- the "vehicle"
tab with:
the range and the current con-
sumption,
- tab "1"
(route 1) with:
the average consumption, the
distance travelled and the aver-
age speed calculated over route
"1" ,
- tab "2"
(route 2) with the same
characteristics for a second route.
Range (km or miles)
Current consumption
(l/100 or km/l or mpg)
This is the average quantity of fuel con-
sumed during the last few seconds.
This function is displayed only when
the vehicle is travelling at a speed
greater than 20 mph (30 km/h).
LIGHTING RHEOSTAT
Zero reset
When the required route is displayed,
press the control for more than
two seconds.
With the lights o
n, press the button to
vary the intensity of the lighting of the in-
struments and controls. When the lighting
reaches the minimum (or maximum) set-
ting, release the button then press it again
to increase (or reduce) the brightness.
As soon as the lighting is of the re-
quired brightness, release the button.
This shows the distance that can still
be covered with the fuel remaining in
the tank in accordance with the av-
erage consumption over the last few
miles (kilometres).
This fi gure may increase if there is a
change in the style of driving or the
road surface, producing a signifi cant
drop in current consumption.
When the range is less than 20 miles
(30 km), four segments are displayed.
After fi lling with fuel, the range is dis-
played when it exceeds 62 miles
(100 km).
If horizontal segments are displayed
for long periods instead of digits, con-
tact a PEUGEOT dealer.