
SPECIAL FEATURES
126
ALARM SYSTEM*
Setting and disarming the
alarm
Switching off the siren
The alarm completes the security
equipment of your vehicle. It com-
prises two types of protection:
- exterior protection: when this is
set, the alarm sounds if a door,
the bonnet, the boot or the tail-
gate are opened.
- interior sensor protection: when
it is set, the alarm sounds if the
sensors detect a variation in the
air movement inside the vehicle
(breaking of a window) or a
movement inside the vehicle.
It is also equipped with an anti-
tamper function.
If an attempt is made to neutralise
the leads to the siren, the central
control or the battery:
- the alarm is triggered,
- the siren sounds, the headlights
come on*.
To set the alarm (exterior and
interior protection)
The ignition must be switched off.
You must be outside the vehicle
Press the locking button of the
remote control key (if your vehicle
has deadlocking, you then need to
press this button again).
The doors will lock.
The direction indicators come on
continuously for two seconds.
The red lamp on the switch flashes
once a second.
Five seconds afterwards : the exteri-
or protection is set.
Fifty seconds afterwards : the interi-
or protection is set.
Note : when the alarm is triggered,
the siren sounds for thirty seconds.
It then stops, but the alarm remains
set.
Warning
If, on setting the alarm, a door, the
boot, tailgate or the bonnet are not
properly closed, the siren will be trig-
gered briefly. If the vehicle is proper-
ly closed within forty five seconds
after this, the alarm is set, the direc-
tion indicators come on continuously
for two seconds.
In all cases the alarm is set forty five
seconds afterwards.
To disarm the alarm (exterior
and interior protection)
Press the unlocking button on the
remote control.
The doors unlock.
The direction indicators flash for two
seconds.
The red lamp on the switch goes out.
Note : if the lamp continues to flash
after disarming the alarm, it is
because it has been triggered. This
flashing will stop on switching on the
ignition.
* According to specification.