85
YOUR 306 IN DETAIL
REAR SEATS (3 and 5 doors)
To fold the rear seats:
- insert the seat belt stalks in the hooks A.
- pull the strap 1.
- tilt the seat cushion 2 against the front seats.
- position the seat belt under the lever 3 (5-door) or on top of the seat-back
(3-door).
- unlock the seat back using the controls on the side 3 (5-door) or on the seat back
4 (3-door).
- tilt the seat back 5.
To tilt the rear seats, always start with the seat cushion, never with the seat
back (risk of damage).
When repositioning, take care to avoid trapping the seat belts under the seat
cushion or behind the seat back.
To remove the rear seat cushion, tilt the seat cushion through 90° and remove it.
To replace the seat cushion: position it on the front securing plates and lower it into
its normal position.
Rear parcel shelf
Rear parcel shelf with integral
speakers
To remove:
- Turn the speaker connector to the
left then disconnect it.
- Unhook the two cords.
- Raise the shelf.
- Remove the shelf.
Storage: turn the shelf over and lay it
flat in the boot.
Rear parcel shelf without integral
speakers
To remove:
- Unhook the two cords.
- Raise the shelf.
- Remove the shelf.
1
1
3
5
2
A
4