87
Luggage cover
Access to the boot:
- from the rear: fold the components
like an accordion.
- from the front (from the rear
seats): raise the part behind the
seat back.
Retaining nets*
The lashing points permit the use of a
luggage retaining net. A full height
load net is also available as an acces-
sory.
* According to specification.
1
4
3
A
2
YOUR 306 IN DETAIL
REAR SEATS (estate)
To fold the rear seats:
- Insert the seat belt stalks in the hooks A.
- Pull the strap 1.
- Tilt the seat cushion 2 against the front seats.
- Position the seat belt under the lever 3.
- Unlock the seat back using the controls on the side 3.
- Tilt the seat back 4.
To tilt the rear seats, always start with the seat cushion, never with the seat
back (risk of damage).
When repositioning, take care to avoid trapping the seat belts under the seat
cushion or behind the seat back.
To remove the rear seat cushion, tilt the seat cushion through 90 degrees and
remove it.
To replace the seat cushion: position it on the front securing plates and lower it into
its normal position.