Ce document est la propriété de Peugeot Sport et ne peut être reproduit ou communiqué sans autorisation.
This document is the property of Peugeot Sport and may not be copied or circulated without permission.
14
207 Spider Technical Instructions
NOT 207 SPI-80
Equipment
Important:
When moulding the seat, the helmet of the driver seated behind the wheel must be
at least 80 mm distant from Line A linking the top of the front and rear structures (Art.
258A.16.1.1). To mould the bucket seat with the car body installed, you can take the
line linking the camber of the body (above the front bow) to the rear bow, using a
38.5mm shim, of about the same thickness (Line B). In this case, the helmet must be
at least 118.5mm from this line.
Furthermore, viewed from the front, the secondary structure must always exceed
the contour of the driver's helmet. (Art. 258A.16.1.2)
01
Ed. :
Summary of Contents for 207 Spider
Page 1: ...TECHNICAL INSTRUCTIONS...
