i
65
High load retaining net (SW)
Hooked onto the upper fi xings and onto
the ISOFIX rings or the lugs, this per-
mits use of the entire loading volume up
to the roof:
-
behind the rear seats (row 2),
-
behind the front seats (row 1) when
the rear seats are folded.
To use it in row 1:
open the covers of the upper fi xings
1
,
unroll the high load retaining net,
position one of the ends of the net’s
metal bar in the corresponding upper
fi xing
1
, then do the same with the
other end,
slacken the straps fully,
fi x the snap hook of each of the
straps on the corresponding lug
3
,
located under the bench seat cushion,
fold the rear seats,
tighten the straps without raising the
bench seat,
check that the net is hooked and
tightened correctly.
To use it in row 2:
fold or remove the load space cover,
open the covers of the upper fi xings
2
,
unroll the high load retaining net,
position one of the ends of the net’s
metal bar in the corresponding upper
fi xing
2
, then do the same with the
other end,
attach the hook of each of the net’s
straps in the corresponding ISOFIX
ring
4
,
tighten the straps,
check that the net is hooked and
tightened correctly.
When positioning the net, check
that the strap loops are visible from
the boot; this will make slackening
or tightening easier.
